|
Las nuevas series de módulos Flimpex Solar PVKP-B1 y PVKM-A1
destacan especialmente por el empleo exclusivo de componentes de
alto rendimiento, como células Q-cells o Ersol, cajas de
conexión Tyco, láminas Isovolta, etc. Los módulos
son elaborados en nuestras nuevas instalaciones de producción
austriacas completamente automáticas.
Los módulos de alto rendimiento son producidos con reducidas
tolerancias de rendimiento y los estándares de calidad más
altos posibles. La resistencia y el alto rendimiento de los módulos
son los puntos clave de nuestro trabajo.
Asimismo, ofrecemos a nuestros clientes módulos comerciales
de Sharp y Canadian Solar que, mediante sus numerosas referencias,
han logrado hacerse un nombre en el mercado. En especial la nueva
serie de película delgada microamorfa NA 115/121 Wp está
encontrando una gran aceptación.
Todos los módulos destacan por su disponibilidad y una atractiva
relación precio/ rendimiento.
| Polycrystalline solar modules |
| |
|
| |
|
 |
| |
|
| |
|
 |
Canadian Solar Modul serie CS6P
CSI CS6P poly
230-250Wp
CS6 series use 156 x 156 mm, 6" high-efficiency silicon cells, typically 180-200 micron thick. Canadian solar’s leading cell and module technology guarantees the world
class stability and reliability backed by 25 years performance warranty. All
series of regular modules are manufactured to the strictest engineering
guidelines, ensuring each module meets the international standards of
quality and safety. Standard modules are powered by 125 x 125mm (5 inch) or 156 x 156mm (6
inch) high efficiency mono-crystalline or poly-crystalline solar cells.
These modules are suitable for all types of solar applications from large
scale solar farms to residential and commercial roof-top systems.
Key Features
- 6 years product warranty (materials and workmanship); 25 years module power output warranty
- Industry leading plus only power tolerance: +5W ( low to +2%)
- Top ranked PVUSA (PTC) rating in California for higher energy production
- Ultra reliable in corrosive atmosphere, verified by IEC61701 “Salt Mist Corrosion Testing”
- Strong framed module, passing mechanical load test of 5400Pa to withstand heavier snow load
- The 1st manufacturer in PV industry to apply ISO:TS16949 (The automotive quality management system) in module production since 2003
- ISO17025 for qualified manufacturer owned testing lab, fully complying to IEC, TUV, UL testing standards
Downloads: Datasheet | Brochure | Installation Guide
|
| |
|
| |
|
 |
Canadian Solar Modul serie CS6P
CSI CS6P mono
230-250Wp
CS6 series use 156 x 156 mm, 6" high-efficiency silicon cells, typically 180-200 micron thick. Canadian solar’s leading cell and module technology guarantees the world
class stability and reliability backed by 25 years performance warranty. All
series of regular modules are manufactured to the strictest engineering
guidelines, ensuring each module meets the international standards of
quality and safety. Standard modules are powered by 125 x 125mm (5 inch) or 156 x 156mm (6
inch) high efficiency mono-crystalline or poly-crystalline solar cells.
These modules are suitable for all types of solar applications from large
scale solar farms to residential and commercial roof-top systems.
Key Features
- 6 years product warranty (materials and workmanship); 25 years module power output warranty
- Industry leading plus only power tolerance: +5W ( low to +2%)
- Top ranked PVUSA (PTC) rating in California for higher energy production
- Ultra reliable in corrosive atmosphere, verified by IEC61701 “Salt Mist Corrosion Testing”
- Strong framed module, passing mechanical load test of 5400Pa to withstand heavier snow load
- The 1st manufacturer in PV industry to apply ISO:TS16949 (The automotive quality management system) in module production since 2003
- ISO17025 for qualified manufacturer owned testing lab, fully complying to IEC, TUV, UL testing standards
Downloads: Datasheet
|
| |
|
| |
|
|
Canadian Solar Modul serie CS5A-M
CSI CS5A-M mono
180-205Wp
CS5 series use 125 x 125 mm, 5" high-efficiency silicon cells, typically 180-200 micron thick.
Canadian solar’s leading cell and module technology guarantees the world
class stability and reliability backed by 25 years performance warranty. All
series of regular modules are manufactured to the strictest engineering
guidelines, ensuring each module meets the international standards of
quality and safety.
Standard modules are powered by 125 x 125mm (5 inch) or 156 x 156mm (6
inch) high efficiency mono-crystalline or poly-crystalline solar cells.
These modules are suitable for all types of solar applications from large
scale solar farms to residential and commercial roof-top systems.
Key Features
- 6 years product warranty (materials and workmanship); 25 years module power output warranty
- Industry leading plus only power tolerance: +5W ( low to +2%)
- Top ranked PVUSA (PTC) rating in California for higher energy production
- Ultra reliable in corrosive atmosphere, verified by IEC61701 “Salt Mist Corrosion Testing”
- Strong framed module, passing mechanical load test of 5400Pa to withstand heavier snow load
- The 1st manufacturer in PV industry to apply ISO:TS16949 (The automotive quality management system) in module production since 2003
- ISO17025 for qualified manufacturer owned testing lab, fully complying to IEC, TUV, UL testing standards
Downloads: Datasheet | Brochure | Installation Guide
|
| |
|
| |
|
 |
Canadian Solar Modul series CS5A-M ALL BLACK
CSI ALL BLACK CS5A-M
160-190Wp
All-black CS5A is a robust all-purpose solar module with 72 solar cells. These modules can be used for on-grid and off-grid solar applications. The all-black modules use high efficiency mono-crystalline silicon cells,
laminated with black back sheet and framed with black anodized aluminum. The all-black modules are the perfect choice for customers who not only are keen on using solar energy, but also look for aesthetic value.
Downloads: Datasheet | Brochure | Installation Guide
|
| |
|
| |
|
 |
| |
|
| |
|
|
Bosch Solar Module c-Si M 60 EU30117
c-Si M 60 EU30117
225-245Wp
Bosch Solar Energy supplies photovoltaic modules based on high-efficiency mono- and multicrystalline silicon solar cells in the size 156 mm x 156 mm. These modules offer high efficiency and excellent value for money.
Downloads: Datasheet | Brochure
|
| |
|
| |
|
|
Bosch Solar Module c-Si M 48 EU30111
c-Si M 48 EU30111
185-200Wp
Bosch Solar Energy supplies photovoltaic modules based on high-efficiency mono- and multicrystalline silicon solar cells in the size 156 mm x 156 mm. These modules offer high efficiency and excellent value for money.
Downloads: Datasheet | Brochure
|
| |
|
| |
|
 |
| |
|
| |
|
 |
Our top performer
The solar module SCHOTT PERFORM POLY
SCHOTT PERFORM TM
225-245Wp
The flexible from SCHOTT Solar – high efficiency and long durability for special demands.
The SCHOTT PERFORM™ POLY 245 excels with its outstanding high nominal output. The peak performer has some specific properties:
- Due to its 6-inch cells, the module’s surface is used very efficiently
- The positive tolerance of the nominal power rating provides a stable high-energy output
- An increased reversed current resistance minimizes wiring costs
- The cavity-free anodized aluminium frame warrants high twist resistance
- The modules have been tested to withstand an increased surface load of up to 550 kg per square metre
- SCHOTT Solar provides a 25-year linearperformance guarantee for these glass-foil modules which guarantees high yields.
Downloads: Datasheet
|
| |
|
| |
|
 |
Very profitable
The solar module SCHOTT PERFORM MONO
SCHOTT PERFORM TM
180-195Wp
The flexible from SCHOTT Solar – high efficiency and long durability for special demands.
SCHOTT PERFORM™ MONO 195 convinces with its mono-crystalline high performance cells. The particularly high degree of cell efficiency ensures a high module performance. Following features characterize the high yield solar module:
- Mono-crystalline high performance cells with efficiency factors of over 17.6% for excellent module efficiency factors of over 14.5%
- The high module efficiency factors provide optimum results on small roof surfaces, more output per module generates high yields
- The positive tolerance of the nominal power rating provides a stable high energy output
- Black cells in combination with black frames lead to outstanding aesthetics
- The cavity-free anodized aluminium frame warrants high twist resistance
- Double internal quality standards in comparison with the IEC-Standard ensure a save investment
- SCHOTT Solar provides a 25-year linearperformance guarantee for these glass-foil modules which guarantees high yields.
Downloads: Datasheet
|
| |
|
| |
|
 |
| |
|
| |
|
 |
THE CLASSIC FOR SECURE YIELDS
Q-Pro G2
230-250Wp
The multi-crystalline Q-PRO-G2 solar module is our classic solution for private rooftop systems.
THE NEW Q.CELLS GENERATION
- Anti PID Technology (APT)1: No power loss caused by potential induced degradation.
- Traceable Quality (Tra.QTM): First traceable and forgery proof solar module on the market.
- New cell concept with reduced serial resistance: Increased power on module level.
- VDE Quality Tested with continuous aging tests: Long-term secure quality.
- Hot-Spot Protect (HSP): Increased fire and performance safety.
- Positive sorting +5 / -0 W: Extra output.
- Tested for wind / snow loads up to 5,400 Pa: Strong in every weather condition.
- 10-year product warranty, 25-year linear performance warranty2: Secure investment.
1 APT test conditions: Cells at -600 V against frame, wet module surface, 25 °C, 300 h
2 Performance warranty: min. 97 % of nominal power in year 1; max. 0.6 % degradation per year from year 2;
min. 83 % of nominal power after 25 years. Full product and performance warranties in accordance with the valid regional warranty terms.
Downloads: Datasheet
|
| |
|
| |
|
 |
ENERGY PACK AND RECORD HOLDER
Q-Peak
245-265Wp
The mono-crystalline Q.PEAK solar module is our energy pack for private rooftop systems.
THE NEW Q.CELLS GENERATION
- Anti PID Technology (APT)1: No power loss caused by potential induced degradation.
- Traceable Quality (Tra.QTM): First traceable and forgery proof solar module on the market.
- New cell concept with reduced serial resistance: Increased power on module level.
- Hot-Spot Protect (HSP): Increased fire and performance safety.
- Positive sorting +5 W / -0 W: Extra output.
- Tested for wind / snow loads up to 5,400 Pa: Strong in every weather condition.
- 10-year product warranty, 25-year linear performance warranty2: Secure investment.
1 APT test conditions: Cells at -600 V against frame, wet module surface, 25 °C, 300 h
2 Performance warranty: min. 97 % of nominal power in year 1; max. 0.6 % degradation per year from year 2; min. 83 % of nominal power after 25 years. Full product and performance warranties in accordance with the valid regional warranty terms.
Downloads: Datasheet
|
| |
|
| |
|
 |
PERFECT DESIGN AND HIGH PERFORMANCE
Q-Peak BLK
235-255Wp
The monocrystalline Q.PEAK BLK module is a pure beauty for private rooftop systems in locations with high architectural demands.
THE NEW Q.CELLS GENERATION
- Full-black design: Outstanding esthetics.
- Anti PID Technology (APT)1: No power loss caused by potential-induced degradation.
- Traceable Quality (Tra.QTM): First traceable and forgery proof solar module on the market.
- New cell concept with reduced serial resistance: Increased power on module level.
- Hot-Spot Protect (HSP): Increased fire and performance safety.
- Positive sorting +5 W / -0 W: Extra output.
- Tested for wind / snow loads up to 5,400 Pa: Strong in every weather condition.
- 10-year product warranty, 25-year linear performance warranty2: Secure investment.
1 APT test conditions: Cells at -600 V against frame, wet module surface, 25 °C, 300 h
2 Performance warranty: min. 97 % of nominal power in year 1; max. 0.6 % degradation per year from year 2; min. 83 % of nominal power after 25 years. Full product and performance warranties in accordance with the valid regional warranty terms.
Downloads: Datasheet
|
| |
|
| |
|
 |
COMMERCIAL AND INDUSTRIAL
Q-smart UF L
95-115Wp
With ratings up to 13.4%, the CIGS solar modules in the Q.SMART series are the most efficient thin-film modules on the market.
THE NEW Q.CELLS GENERATION
- World‘s best efficiencies up to 13.4 %: Highest yields per installed area.
- Anti PID Technology (APT)1: No power loss caused by potential induced degradation.
- Outstanding low-light behaviour for 360° Efficiency (TDE): High yields even in challenging roof expositions - north, west, south or east.
- Additional Power Boost (APB) with up to 15 % additional output due to positive sorting (+5 / -0W) and light soaking effect: More power for your money.
- Increased module surface (0.94 m²): Optimal utilization of flat roofs.
- Frameless Design: Ideal for roof-parallel installations on flat roofs.
- 10 years product warranty, 25 years linear performance warranty, even for installations < 30 kWp2: Secure investment.
1 APT test conditions: Cells at -600 V relative to support, wet module surface, 25 °C, 300 h
2 Performance warranty: min. 100 % of nominal power in the first 3 years; max. 0.7 % degradation per year from year 4; min. 85 % of nominal power after 25 years. Full product and performance warranties in accordance with the valid regional warranty terms.
Downloads: Datasheet
|
| |
|
| |
|
VERSATILE. DESIGNED. CUSTOMIZED.
KPV’s extensive product range allows to respond to a variety of individual customer‘s requirements. High-quality raw materials guarantee a long-life-cycle as well as a beautiful design. KPV offers two
product lines: „Power 54 Modules“ - top-module range with solely European components - and „Project 54 Modules“ using especially selected components to achieve a better value for money in big PV-plants.
KPV sells the best photovoltaic modulescurrently on the market. Austrian quality standards guarantee the highest efficiency in long-term use. With our comprehensive service, it’s a sure thing. Photovoltaics from Austria – The sun rises in Austria.
KPV PHOTOVOLTAIC MODULES ENTITLED TO ACHIEVE THE ITALIAN 10% TARIFF SURPLUS WITH GSE-COMPLIANT CERTIFICATE!
Since the introduction of the new Italian feed-in law "Conto Energia IV" only photovoltaic installations with modules, that are manufactured in the European Union are entitled to achieve a 10% bonus additional to
the tariff. As the largest Austrian module manufacturer and one of the first manufacturers worldwide, KPV Solar GmbH now obtained a "Declaration of Origin", issued by TUV Rheinland and accepted by the GSE, that
certifies the European production content for the whole product range of the KPV module series (KPV PE NEC, KPV PE QCells, KPV ME EC). TÜV Rheinland established the contents of this "Declaration of Origin" in close
collaboration with GSE to avoid confusion in the market caused by non-authorized certificates and to introduce a general standard for this new regulation introduced by Conto Energia IV. The certification process, which
includes an independent factory inspection of the production site in Austria was successfully completed on 26th July. Hence KPV modules are among the first products on the market complying with the requirements
necessary to achieve the 10% tariff surplus according to Conto Energia IV.
The Austrian KPV Solar GmbH is a technologically versed, leading and certified solar company. The wide field of operations is split into two main parts. International distribution of high quality, innovative Austrian
photovoltaic products, including the possibility to produce special products from the product-idea until certification and market launch. KPV offers 12 years full product warranty and a linear performance warranty over
a period of 25 years for its photovoltaic modules. Furthermore, KPV Solar plans, realizes and operates large PV power plant projects for investors amongst others in Italy, Slovenia, Czech Republic and Bulgaria. KPV
modules and power plants deliver significant higher yields than calculated by independent test laboratories due to the highly automated production line, linear performance warranty, optimal planning and technical support
as well as relying on European premium components. This surplus is provenby achieving outstanding2nd place in the Photon Module Test 2010.
|
| |
|
| |
|
 |
KPV Modulserie PE-NEC
KPV-PE-NEC
195 - 210 Wp
Downloads: Datasheet | Brochure | Installation Guide
|
| |
|
| |
|
 |
KPV Modulserie PE- Q- cells
KPV-PE-Q-cells
195 - 210 Wp
Downloads: Datasheet | Brochure | Installation Guide
|
| |
|
| |
|
|
KPV Modulserie ME EC
KPV ME EC
220 - 225 Wp
Downloads: Datasheet
|
| |
|
| |
|
|
KPV Modulserie ME EC BlackBlack
KPV ME EC BlackBlack
220 - 225 Wp
Downloads: Datasheet
|
| |
|
| |
|
|
KPV Modulserie ME NEC
KPV ME NEC
220 - 225 Wp
Downloads: Datasheet
|
| |
|
| |
|
|
KPV Modulserie ME NEC BlackBlack
KPV ME NEC BlackBlack
220 - 225 Wp
Downloads: Datasheet
|
| |
|
| |
|
|
|
|
